ESD Tape contains black conductive grid to shield the open end of packaging from electrostatic discharges (ESD).
Shipping Rates

Meets ANSI/ESD S20.20 and IEC-61340 requirements for low charging and static dissipative tapes, labels, and liners.

• Available in 1/2 inch, 3/4 inch, 1 inch, and 2-inch widths.

Prices

WidthRollsPer Sleeve
Half Inch Wide24 Rolls$45.33
Three Quarter Inch Wide16 Rolls$44.10
One Inch Wide12 Rolls$41.47
Two Inches Wide6 Rolls$33.07

Specs

MeasurementValue
Length36 Meters
Core3 Inches
Thickness1.9 mils
AdhesiveAcrylic Based
Grid MaterialCarbon / Polypropylene
ESD Resistance of Grid Layer103 to 104 Ohms (ASTM D-257)
ESD Resistance of Top LayerLess than 1012 Ohms (ASTM D-257)
ESD Resistance of Sticky LayerLess than 109 Ohms (ASTM D-257)
TribochargingLess than 100 volts
Maximum Temperature140F | 60C

ESD Control

ESD Conductive Grid Tape prevents sparking on both its inside and outside surfaces.

Made with a static shielding conductive grid that blocks electrostatic discharges (ESD), the outer two static dissipating layers will not shed, crack, chip, or rub off.

Diagram of How ESD Tape is Conductive and Static Dissipative

When used with a grounded tape dispenser the amount of static electricity generated is effectively zero.

Conforms with ANSI/ESD S20.20 and IEC-61340 requirements for low charging and static dissipative tapes, labels, and liners.

Shipped in secured IC DIP tubes and printed with ESD symbols.

You may also like…