$7.90
111 in stock
4725 Series Mat Grounds have a rounded profile that prevents people from tripping over it.
• Socket on bottom of Mat Ground fits with snaps for mats.
• 15 Foot Ground Cable ends in an eyelet to screw Mat Ground directly into the ground line in an electrical outlet.
| Qty 1-9 | Qty 10-99 | Qty 100+ |
|---|---|---|
| $7.90 USD | $7.31 USD | $6.81 USD |
| Dimension | Specification |
|---|---|
| Profile | Rounded to Prevent Tripping Over It |
| Grounding Cable Length | 15 Feet |
| Grounding Cable Insulation | Polyurethane / PVC |
| Ground Cable Terminal | Ends in #10 Ring Type to Screw into Electrical Outlet |
| Ground Cable Surface Resistivity | Static Dissipative |
| Resistor | 1 Meg Ohm |
| Snaps Into | 10mm Snap Installed on Mat (Link Opens New Window) |
Mat Grounds come with a 10mm diameter socket built into the bottom to plug into Snaps for Mats.
* Snaps pre-installed on ESD Table Mats, Anti Fatigue Mats, and mats sold as Workstation Kits on Elimstat.com fit the Mat Ground.
Electrical outlets typically are the best ground in any building because they follow the piping to the Earth’s electrical field underneath the building.
To connect the Mat Ground to an electrical outlet screw the #10 Ring Terminal on the end of the cable into an electrical outlet. (The #10 Ring Terminal fits a standard US electrical outlet).
It’s recommended you have grounding attached for every 5 feet of mat.
* Mats should not be “daisy-chained” together.
Made of polished polyurethane (PU) the cord insulation itself is static dissipative.
1 Meg Ohm = 1 x 106 Ohms
A 1 Meg Ohm Resistor is built inside the cord to slow down an electrostatic discharge event (ESD) from a highly charged ungrounded surface from discharging instantaneously through the cord.
Typically a 1 Meg Ohm Resistor slows down an electrostatic discharge (ESD) a few more milliseconds than if it were not present.
You must be logged in to post a review.
Reviews
There are no reviews yet.