Common Point Ground Cable for Anti Static / ESD Mats
How to Ground ESD Mat with Common Point Ground
How to Ground Anti Static Mat with Common Point Ground
SKU: 4715 Category: Tags: , , , , , ,

57 in stock

$9.28

• Socket on bottom fits with snaps for mats.

• Flat Profile has two banana jack sockets to plug coil cords into.
• 15 Foot Grounding Cable ends in an eyelet to screw Common Point Ground directly into the ground line in an electrical outlet.

Prices

Qty 1-9Qty 10+
$9.28$8.35 USD



How to Use a Common Point Ground

Specs

DimensionSpecification
ProfileFlat Profile with Two Receptacles for Banana Jacks
Grounding Cable Length15 Feet
Grounding Cable InsulationPolyurethane / PVC
Ground Cable TerminalEnds in #10 Ring Type to Screw into Electrical Outlet
Ground Cable Surface ResistivityStatic Dissipative
Resistor1 Meg Ohm
Snaps Into10mm Snap Installed on Mat
(Link Opens New Window)
Physical DimensionsWidth Across: 1 1/2 inches
Depth: 1 inch
Height: 1/2 inch

Common Point Grounds are Static Dissipative

Made of polished polyurethane (PU) the cord insulation itself is static dissipative.

1 Meg Ohm = 1 x 106 Ohms

ESD Resistance Chart for Common Point Ground

A 1 Meg Ohm Resistor is built inside the cord to slow down an electrostatic discharge event (ESD) from a highly charged ungrounded surface from discharging instantaneously through the cord.

Typically a 1 Meg Ohm Resistor slows down an electrostatic discharge (ESD) a few more milliseconds than if it were not present.

You may also like…