Static Shielding Specs
|Electrical Properties||Typical Values||Test Method|
|Surface Resistivity||< 1012 Ohms / Square||ASTM D-257 @ 15% RH|
|ESD Resistance||< 1011 Ohms / Square||ANSI/ ESD STM 11.11|
|Static Shielding||< 10 nJ||EOS / ESD S11.31|
|Electrostatic Decay||.01 Seconds||FTMS 101 Method 4046|
|Capacitance Probe||< 10 volts Difference||MIL-PRF-81705D, EIA 541|
|Transparency||40% (Bar Code scans through bag)||ASTM D 1003|
|Corrosion | Outgassing||Non-Corrosive | Pass||MIL-STD-3010, M3005 | ASTM E595|
|Amines, N-Octanoic Acid, Heavy Metals||Not Present / Recyclable||RoHS, REACH|
• ASTM D 1003 Compliant: Transparent enough for barcodes to be scanned through the bag
• IEC 60417 6202 / ESD Rating of “S”: electrostatic discharge shielding
• ANSI / ESD S8.1 Compliant: ESD Protective Symbol and lot codes printed on bags
• Sizes reflect inner dimensions
• Amine and Amide Free
• RoHS and REACH Compliant
Static Shielding Bags are constructed of plastic and aluminum in a pattern known as “metal-in”.
The “metal-in” layer is composed of ESD shielding aluminum laminate that provides a conductive Faraday Cage around electronics inside the bag. This is what stops electrostatic discharges (ESD) from entering it.
The anti static outer layers are made of static free polyethylene (PE) and polyester (PET). These prevent the bag from charging when it rubs against other surfaces.
All static shielding bags sold on Elimstat.com are lead-free, contain no amines, N-Octanoic acid, or heavy metals. This keeps them in compliance with RoHS and REACH.
They have no effect on aluminum, copper, silver, SN-Pb coated foil, stainless steel or low-carbon steel.