Simco Ion™ Aerostat Guardian Overhead Ionizing Blower


This item is currently out of stock. Request a backorder here.

• AC Corona Ionization. Eliminates Static from Ungrounded Objects

• Integrated Heater and Task Lights

• 120V, 60 HZ, UL Listed in USA and Canada

• Compatible with Class 100 / Class 5 Cleanrooms


ProductQty 1+
Simco Ion™ Aerostat Guardian Overhead Ionizer$1,119.00


Input Voltage120 VAC, 60 Hz: 0.5A (fan low, heater/light off); 2.5A (fan high, heater/light on)
Discharge Time3 seconds @ 18″ center blower position; fan high no diffusers (1000-100V)
Balance0±5V @ 18″ from blower fave
Ion EmissionAC Ionization
Coverage2′ x 4′ area
Cleanroom ClassMeets ISO 14644-1 Class 5; Fed Standard 209E Class 100
Emitter PointsStainless Steel
ControlsFan speed control knob BLOWER ON; on/off switch HEATER & TASK LIGHT
Indicator LightsOrange IONIZATION STATUS; orange within of/off switches HEATER & TASK LIGHT
Air Volume150-300 cubic feet per minute (low to high), combined 3-fan output
Heated Air Temp25F (14C) fan low; 11F (6C) fan high
(measured @ 6″ in front of center fan above ambient)
Audible Noise50 dBA fan low; 60 dBA fan high
Operating EnvironmentTemperature 32-122F (0-50C);
humidity 30-70% relative humidity, non-condensing
Ozone0.02ppm, measured @ 12″ in front of unit
Lamp13W twin tube, compact fluorescent,
1650 lumen total task light output
Air Filter30 ppi open cell polyurethane foam (optional)
MountingAdjustable brackets and S-hooks provided
EnclosurePowder-coated white enamel aluminum
Dimensions42.75 inches (width) x 4 inches (height) x 6.75 inches (depth)
(108.6 x 10.2 x 17.1 cm)
Weight16 lb (7.3 kg)
WarrantyTwo year limited warranty

AC Corona Ionization

AC Corona Ionization. When an AC ionizer is used high voltage is applied to a single emitter point that cycles between negative and positive at line frequency (50/60 Hz). Since the cycles are so fast, there is a high level of recombination of ions.

When should I use an AC Air Ionizer?

AC corona ionization is most appropriately used in industrial applications where the ionizer can be placed close to the charged objects and cleanliness is not required.

How does ESD Air Ionization Work?

When AC (alternating current) or DC (direct current) is applied to a sharp emitter point it creates an electric field or “corona” around the emitter. This high voltage corona of ions then interacts with electrons in the nearby gas molecules “cleaning” the air of unwanted charged air molecules.

ESD Air ionizers are used to remove static electric charges from the surfaces of ungrounded objects. (Keep in mind, you can use anti static mats to ground table tops and standing surfaces.) However, if you need to make sure static is not building up on your workstations consider using ESD air ionization.


There are no reviews yet.

Be the first to review “Simco Ion™ Aerostat Guardian Overhead Ionizing Blower”

You may also like…